AUTONET TV

Bad Vibes

Your vehicle has a way of letting you know when something's wrong. Consider a vibrating steering wheel. It certainly didn't do that when it was new, so that shake is trying to tell you something.

There are a few things that can cause your steering wheel to vibrate as you drive down the road.  One of the most common is out-of-balance tires.  You may not only feel that wobble in your steering wheel, you might also feel it in the tires.  Sometimes it's not there when you're driving at lower speeds through residential areas, and sometimes it starts when you hit highway speeds. 

So what is tire balance anyway?  Well, you have a rubber tire that fits around a metal wheel.  It should have the same weight all the way around.  If it doesn't, it will start getting the shakes.  Ever load your washing machine so that all the clothes are at one side of that drum that spins?  When it hits the spin cycle, it can throw that washer against the wall. 

That's the same thing that's happening with an out-of-balance tire/wheel combination.  A technician has special equipment to figure out where to put small weights on the wheel to get things back in balance again.  But it could be that you hit a pothole some time ago and bent the rim.  Or your tire isn't as round and even as it once was.  That could be due to age, damage or wear and tear. The technician will know and offer you options.

Another possibility for that vibrating wheel is a faulty brake, such as warped rotors or a sticky caliper.  All of these issues can be evaluated as part of regular, routine maintenance with us.  There are many things that cause vibrations in your wheels.  But you don't want any bad vibes when it comes to your vehicle. 

Losing Your Cool (AC Condenser Replacement)

It’s always more comfortable in your vehicle when you can control temperature and humidity in the cabin. Air conditioning, which is standard on most newer vehicles, is a vital part of that comfort, and a key component of that system is the condenser.

The condenser converts the refrigerant gas into a liquid by cooling it down.  There are a few reasons the condenser can fail.  It can start leaking, which is usually caused by faulty seals and tubes, or debris from the road can damage it since it sits in a vulnerable spot at the front of your vehicle.  

Another way your condenser can be damaged is when bits of metal are released after your vehicle’s air conditioning compressor fails and are sent into the condenser. In both cases, you will have to have the condenser replaced as well as other components that are part of the system.

Here are signs that your condenser needs replacing.  When you turn on your air conditioning, it won’t make the air as cold as you’re used to it getting.  Or it may not get cold at all. Since other things can cause those symptoms, it’s best to bring your vehicle in to us to have one of our technicians determine where the problems are.

They’ll check the system’s pressure and thoroughly inspect for leaks.  If the problem is the condenser, they’ll replace it, refill the refrigerant, search for any more leaks in the system and give your air conditioning a final test to make sure it’s operating correctly.  

Keeping your air conditioning system working helps maintain the value of your vehicle.  It not only keeps the cabin cool when it’s hot outside, but also helps the defroster work properly and controls humidity in all seasons and climates.  Now, that’s very cool.

Kingwood Service Center
3318 Northpark Dr
Kingwood, TX 77339
(281) 360-7323
http://www.kingwoodservicecenter.net

Before You Buy a Used Vehicle (Car Inspection before Buying a Used Vehicle)

Before You Buy a Used Vehicle (Car Inspection before Buying a Used Vehicle)

Perhaps this sounds familiar. Your vehicle seems like it’s been around forever, and you’ve decided it’s time to move on.  But when you check the price of new vehicles, the sky-high price tags have you considering a nice, pre-owned one.  

So, you start looking through the ads and find a few prospects.  A couple look great, and the owners say they’re in like-new shape.  But most of us aren’t trained mechanics, nor do we have the equipment to run the tests to determine what’s right and what’s wrong with a used truck, car, SUV or van. 
 
The answer may be to consider having a trained professional perform an independent inspection on the vehicle you have your eye on. Some dealers may conduct their own inspection, but you are best served by having someone not associated with the seller thoroughly check that vehicle you have your eye on.

A technician puts the vehicle up on a lift to look for damage, corrosion or any signs of accidents or flood damage you can’t see when it’s sitting on the ground.  A used vehicle inspection includes checking brakes, wheels and tires, belts and hoses, suspension components and the heating/air conditioning systems.

In addition to inspecting the vehicle visually, the technician can use a professional, full-function scanner to look for codes stored in the vehicle’s memory and diagnose other electrical issues.  It may also show if there have been any warning lights that have come on recently or if someone has wiped the memory to try to hide something.

Unless you are a professional automotive technician, consider investing in a comprehensive, pre-purchase inspection.  No, it can’t guarantee to turn up everything that might fail in the future, but it can be a bargain to have peace of mind that the vehicle you’re considering is worth the considerable investment you are contemplating. It could also give you additional bargaining leverage.  

Kingwood Service Center
3318 Northpark Dr
Kingwood, TX 77339
(281) 360-7323
http://www.kingwoodservicecenter.net

Beginning to See the Light (Check Engine Light Diagnostics)

It's a light many drivers fear they'll see turn on at the most inopportune time.  It's the one on the dash that says "Check Engine," "Service Engine Soon," or it may be simply an engine-shaped light. Your first instinct may be to pull off to the side of the road and turn off the engine.

The truth is that Check Engine light can be pointing to problems as simple as a loose gas cap. But it could be as serious as a severely misfiring engine.  Don't ignore it because it's there to help you avoid an expensive repair it is designed to alert you to, to tell you something's not quite right.

Your vehicle has a connected system of computers and sensors constantly checking to see that all systems are working the way they should. If something isn't, the system will turn on the Check Engine light.

If it's flashing, that could be serious. Look at some of the other warning lights or gauges such as heat or oil pressure. They could be telling you your vehicle's problem should be checked right away. In that case, if you can, safely pull off the road and shut the vehicle down. If your vehicle loses power and the Check Engine light is on, try not to push the demands you are making on the engine, such as towing or accelerating hard.

Simply put, a flashing Check Engine light should be checked out by a professional as soon as possible.

If the Check Engine light is on steadily, manufacturers say it means there's a problem, but it probably doesn't require immediate service.  The system is designed to remember the problem it found and store it (as a code) so it can be retrieved later.

When you do bring your vehicle in to have us see what's behind the Check Engine light coming on, we’ll hook your vehicle up to a diagnostics tool that can reveal the clues the engine's computers have stored.  It takes a trained technician to understand those clues, like a doctor who can interpret a patient's symptoms and come up with the correct diagnosis. Some newer vehicles can even be checked remotely.

Once we figure out the problem and repair it, you'll be back on the road again. It's nice to know the Check Engine light is your sentry, standing by to alert you the next time you begin to "see the light."

Kingwood Service Center
3318 Northpark Dr
Kingwood, TX 77339
(281) 360-7323
http://www.kingwoodservicecenter.net